A popular American childhood story called “The Little Engine that Could” relates to this article. The Merlin PSA (Personal Sport Aircraft) from Aeromarine-LSA is a modern single place airplane that does everything you want — well, other than carry two people — while remaining highly affordable.
Given that some Light-Sport Aircraft shoot past $200,000 (some even past $300,000!), Merlin looks very reasonably priced for the rest of us.
A large number of LSA enthusiasts have complained that present-day LSA have become way too expensive for their budgets. Back when we were still awaiting Light-Sport Aircraft many pilots thought LSA would cost $50-60,000 and it seems not many choices are available in that range. Some are, but most are quite a bit more costly. It’s important to be accurate. Understand that $60,000 in 2002 — when people were speculating about the price of a LSA — is the same as $83,000 today, when you calculate the purchasing power of either number at those times.*
Now think of Merlin’s price tag.The Little Airplane That Could …Merlin Can, and It Will Not Cost Much, Either
Chip Erwin flying the Merlin PSA
A popular American childhood story called “The Little Engine that Could” relates to this article. The Merlin PSA (Personal Sport Aircraft) from Aeromarine-LSA is a modern single place airplane that does everything you want — well, other than carry two people — while remaining highly affordable.
Given that some Light-Sport Aircraft shoot past $200,000 (some even past $300,000!), Merlin looks very reasonably priced for the rest of us.
A large number of LSA enthusiasts have complained that present-day LSA have become way too expensive for their budgets. Back when we were still awaiting Light-Sport Aircraft many pilots thought LSA would cost $50-60,000 and it seems not many choices are available in that range. Some are, but most are quite a bit more costly. It’s important to be accurate. Understand that $60,000 in 2002 — when people were speculating about the price of a LSA — is the same as $83,000 today, when you calculate the purchasing power of either number at those times.*
Now think of Merlin’s price tag. It can be held to less than $50,000 today even with a four-stroke ASTM-compliant engine that provides an abundance of power for Merlin. That amount is approximately the same as $36,000 in 2002. Using the potent (and also ASTM-compliant) Rotax 582 and installing a panel basic means you can contain your out-of-pocket investment to a little more than $30,000 today (a shade over $21,000 back in 2002!).
These facts give Merlin highly affordable price points. As U.S. importer Chip Erwin has developed Merlin in multiple directions you can even consider electric propulsion. Such powerplants may be coming for LSA in general, but for an Experimental Amateur Built aircraft you can choose electric as soon as the hardware is available.
Build, Buddy, Build
Full disclosure. Merlin is a kit. It is not a Light-Sport Aircraft. You have to build it.
The Merlin PSA kit comes remarkably finished yet it meets the FAA requirements and is on the approved list.
The good news is Merlin is a surprisingly fast-build kit. I have often stated that I am not a builder but to become a better educated journalist, I went to a location where Chip was helping a customer build his. I watched his effort and asked him many questions.
As Chip notes in the video below, Merlin comes in from the fabricator in Europe significantly assembled. See the nearby photos to see the state of build at the beginning of the kit assembly. It already looks like an airplane not merely a collection of many small parts and aluminum sheets. This level of completion is FAA approved; Merlin is ready to go on the 51% kit aircraft list.
I don’t want to minimize the work effort as that could diminish the efforts of those who do the work. Indeed, plenty of details remain from what you see in the images. Yet the task is made much easier by one giant step provided by the Europeans.
By now many readers are familiar with the term matched-hole construction. This means the holes where a rivet will be secured are so accurately punched by CNC machinery that no jigs are needed. You line up the holes, drill to rivet size, pop in a rivet, and move to the next. Next comes precision-matched-hole where the holes are so perfect that no further drilling of pilot holes is needed. They are ready for the rivet as delivered.
Merlin goes a further step beyond. The holes already have special, colored rivets that hold the parts in place. A builder removes them, does the under-skin work as needed — wiring, linkages, fuel lines — and re-rivets. I watched some of this occur and it is fairly amazing as a process. I might even attempt it and I’m not a builder.
With dedication and especially with some professional assistance as is possible today, a builder can finish the project in as little as two weeks.
Is that work effort worth it, considering you can hold the price below the once-expected price of a LSA? Only you can answer that question but Erwin’s Aeromarine-LSA company based in central Florida has brought affordability back into the picture.
Is a single seater enough for you? It very well may be considering airplanes are frequently flown solo. Learn even more in the following video recorded at EAA AirVenture Oshkosh 2018.
* The dollar amounts are generated using the U.S. government’s Consumer Price Index.
A popular American childhood story called “The Little Engine that Could” relates to this article. The Merlin PSA (Personal Sport Aircraft) from Aeromarine-LSA is a modern single place airplane that does everything you want — well, other than carry two people — while remaining highly affordable.
Given that some Light-Sport Aircraft shoot past $200,000 (some even past $300,000!), Merlin looks very reasonably priced for the rest of us.
A large number of LSA enthusiasts have complained that present-day LSA have become way too expensive for their budgets. Back when we were still awaiting Light-Sport Aircraft many pilots thought LSA would cost $50-60,000 and it seems not many choices are available in that range. Some are, but most are quite a bit more costly. It’s important to be accurate. Understand that $60,000 in 2002 — when people were speculating about the price of a LSA — is the same as $83,000 today, when you calculate the purchasing power of either number at those times.*
Now think of Merlin’s price tag.
This week kicks off the truly gigantic trade show known by its sponsoring organization’s abbreviation: 
I always find something of interest to the light aviation, recreational flying community. This year, I’m on the lookout for 
This weekend a firestorm erupted out of the blue. A wave of questions is ringing my phone, piling up text messages, and populating my social media accounts. Because it seems premature, I preferred not to weigh in on LSA weight but given the volume of comments, neither can I remain silent.
I reached out to contacts in the agency and got a reply even though government is closed for Columbus Day. Here’s what I learned from the group tasked with preparing this rule.
Third — LSA gross weight will rise but “not to a hard number” like 3,600 pounds. It will involve a maximum horsepower, a given stall speed, among other considerations, all of which will rely on the laws of physics to keep the aircraft design reasonable.
About this weekend’s news, one U.S. supplier said, “I’m pretty worried.” He’s concerned people may hold off a purchase, waiting to see what happens. “I’ve seen it before,” he added. However, since the new rule remains years away, no buyer ought to halt the joy of acquiring and flying a new aircraft.
Have you noticed how much LSA seaplanes pop up on this website and all over the web and print world? I admit to fascination with the developments these versatile aircraft are bringing to market but my attitude is shared by many others.
Icon’s “Fleet Access” program is a full-service sales and aircraft management solution that offers 50% and 25% ownership shares of the A5 and, “unlike many other programs in the industry, will also allow owners to use other shared A5 aircraft in various locations across the U.S. as if they were their own.” This is different than other fractional programs I’ve examined and it provides all scheduled maintenance, storage, insurance, scheduling, dispatch, staging, and more. They can even help with one of their custom designed trailers.
No, this isn’t a partnership program where you have to find several other partners and then administrate the cooperation. That’s a fine idea but it has never become popular as it takes some level of bureaucracy. Icon eliminates that effort by managing the program itself.
Can your interest be turned into a money-making proposition? Yes, it can.
So far, at least three entries
Had Mike written a regulation back then to include multicopters like Scorpion he would surely have been relocated to some remote post where his craziness would not be obvious.
Some readers who read the 
If you want to read more about the company’s view of Scorpion, 
FAA’s Light-Sport Aircraft category involves quite the intriguing mixture of aircraft. Fixed wing aircraft of many descriptions, weight shift, powered parachute, gyroplanes, motorgliders, seaplanes, of course, and, lighter-than-air. 
Leandro observes that established balloon manufacturers are accustomed to working in the FAA or CAA certified aircraft environment, often building large balloons used commercially to give rides. These producers have smaller aircraft but evidently pursue the higher cost variations. They may not be familiar with ASTM standards as used for all Light-Sport Aircraft and no others have chosen to address the LSA market.
Because no prior company has offered an aircraft using those standards, it seems likely FAA will want to audit this first LTA entry. Until passing muster with FAA, FlyDoo can be made available as an Experimental-Amateur Built.
Over many years, you have found 
Our new associate, Steve Beste, wrote an excellent article for his club newsletter and I will summarize that piece in another post.
As you can see, 
“[However, FAA’s] data is not clean,” Steve observed. I am well aware of this problem. Uncertainty about data accuracy of “alternative” LSA is why we have reported fixed wing Special LSA, only offering guesses for weight shift trikes, powered parachutes, gyroplanes, motorgliders, and more.
Problems in FAA’s database is not caused by incompetent clerks. Agency personnel must sort through inconsistently-reported aircraft. If, as Steve pointed out in one example, the registered name of the aircraft is slightly different, it won’t show up on a casual investigation.
Chuck’s son Jim Vanek took over the business and revamped the Vancraft designs. He said his “award-winning, world’s-first, two-place gyroplane took the prestigious Charles Lindbergh award at the Oshkosh airshow in 1985.” The company also reports his Sport Copter II design was voted as one of the Top Ten Best Designs at AirVenture in 2011.
The company said, “We offer 22 thru 28 foot rotor blades of our own design with a lift capability from ultralight thru 1,200 pounds gross weight.” They added, “We are the only manufacturer that test flies all blade sets prior to shipping.” For export, Rotor Flight will fully build their aircraft but in the USA, FAA will only permit them to deliver kits, the same as all gyroplane producers.
LSA seaplanes have provided some of the most interesting new developments in aviation. Perhaps interest stems from the vast numbers of landable waterways compared to runways. Perhaps it’s the versatility of amphibians. Maybe people are simple drawn by the good looks or unique qualities of entries.
Part of the innovation Tomas introduced is a novel hybrid propulsion system to provide range, fuel efficiency and redundancy with all the benefits of electric power. With a purpose-designed control management system, the total pilot workload is reduced and higher levels of security are achieved, he believes.
Further innovation is a fly-by-wire rudder and drive-by-wire nosewheel. “Both are experimental technologies, Tomas explained, “that we believe may make it simpler for the prospective owner and pilot to learn how to fly. No more hand and foot coordination, here you can put your feet up high and use your hands only for all control inputs.”
P2 Xcursion’s thrust is provided by an unusual aviation powerplant involving three elements: a motor spinning the prop; an electric generator supplying the motor and batteries; and an internal combustion engine powering the generator. At this time, P2 has both a test and boost battery plus it has the required electronic control unit (ECU).
As a sum, the three elements weigh 233 pounds, roughly the weight of a legacy 100 horsepower aviation powerplant.
Many years later, Equator’s P2 Xcursion first took flight in spring of 2018.
Recently, seaplane enthusiast and businessman Paul Richards informed us of a move for a leading producer of floats for light aviation: Clamar.
“Clamar’s new manufacturing facility will leverage a recently commissioned, advanced composites manufacturing center which includes an environmentally controlled layup room, high temperature processing oven, paint booth and advanced machining suite,” said Paul.
This article was 
Vendors in attendance logged steady demo flights to prospective customers. 
Airport manager Chris Collins forwarded more photos of the ceremony dedicating the SW21 Jet to the Mt. Vernon airport. Of the one with Jon Hansen reverently touching the main support for the aircraft he donated to the airport, Chris said, “I love this shot!”
Many pilots expect the first appearance of a new model at the biggest airshows, but here’s one of those times when the sector-specific shows win. It’s all about timing and the new Aeroprakt A32 just won it’s SLSA approval (#147 on our 
First blush: This is a great flying airplane, reflecting Aeroprakt’s experience producing more than 1,000 of the predecessor 
When deploying or retracting flaps, the pitch change is very minor. True, two notches is only 20° of flaps but deploying them made quite an aerodynamic change, just not a pitch change. On one landing I made with no flaps, I had to raise the nose significantly high to put A32 on the ground.
A32 uses the identical wing from A22 from the fuselage root out. However, the many clean-ups of the fuselage — and they are many, which you will see more fully in the Video Pilot Report to follow after editing — make the new model more efficient. A pilot literally has to work at getting it back on the ground …and that’s a good thing.
Takeoff and landing has been quoted at “under 100 meters” (300 feet) and I believe it. No question it was short, assuming, of course, decent technique.
The biggest airshows in recreational aviation are history for 2018. I refer to 
The sector specific shows are much smaller. That’s a good thing.
In between and up next: 
We start in September, pop up two months later in Florida, kick off the new year two months later in central Florida, and anticipate spring a month later in Arizona. In all, I’d call this an active schedule serving much of the recreational flying community. I’d hope you could make at least a couple of these if not all four.
American producers were the kings of kits, an effort that calls for good assembly instructions and technical support plus groups that can help each other. These two activities represent night and day differences.
As many readers know, nearby Synergy Air was Van’s assembly partner for several years. “[They have] done a tremendous job for Van’s and our customers,” stated Van’s. Synergy Air will continue to work with Van’s but will return to concentrate on builder-assist activities.
The natural evolution and success of both businesses has brought us to where we are today. Synergy has become even more focused on the business of assisting Van’s Aircraft’s customers in building their RV airplanes. As the SLSA program has matured, Van’s has expanded its workforce and capabilities to include marketing and aircraft construction. This change represents the next logical step in both companies’ successful business growth.
You can and should expect excellent quality from a business that continuously strives to improve its products and services. Van’s approach is to delivering the highest quality products. Our aircraft assembly and delivery department — a dedicated team focused on just that portion of our business — is staffed by experts with years of RV-12 building experience. Van’s will, as always, strive to adopt and leverage new, innovative processes and technology to drive its ongoing quality program.
No, not at all. This change is the result of mutual successes, and represents a natural and positive evolution of both businesses. It will enable both companies to deliver even more, both in partnership and separately.
In this article, I am writing about one of most affordable aircraft you can build. Legal Eagle is not available either fully built or in a full kit.
How low can the price go?
You buy a set of plans for $50 and invest six to nine months of your time. Other packages offer a series of videos and more details. Some builders will choose the welded fuselage and a materials kit though these will increase costs beyond the bare minimum.
One essential visit at 
Quad City’s partner, National Ultralight, said “[Our new] EL-65 is a long wing, two seat, high power, high lift aircraft well suited for amphibious floats, heavy loads and high density altitudes. The new ES-65 is a clip wing derivative of the EL-65 optimized for speed with a wing four feet shorter.
“Affordable” is a variable term that depends on an individual’s budget. What one pilot might afford another cannot. Yet how about this offer from Quad City? “Quick-build packages including airframe, instruments, engine, prop, […everything you need] start at $29,975.” I have to judge that a remarkable bargain in light aviation.
While this space is usually dedicated to cool new airplanes — not boring government policy reviews …yawn! — this article will provide some rays of light to an industry approaching its 15th birthday (in September 2019). I think some of this may surprise you.
After many meetings with high-level FAA executives and project managers, we are pleased to report that ALL these objectives and one more — increasing the gross weight of LSA — are included in FAA’s present actions regarding rule making. Note that gross weight will probably be determined by a new system other than a fixed-weight number but the exact formula is pending while FAA finalizes their regulation plans.
We are proud of what we’ve been able to accomplish on the skinniest of budgets but we did not fly solo.
So, following a direct request from top FAA executives, we submitted a comprehensive business case for a program that we hope will much sooner allow manufacturers, dealers, owners, operators, and pilots to exercise the core-four-plus-one privileges.
We simply had to do a video interview with the developer of the 1930s-era Ryan ST because of its fascinating history and its handsome good looks. If you love vintage aviation, this should grab your attention as it did mine.
The project is not merely a personal fascination for Nick. He will be selling a builder’s kit and specifically chose the 95% scale to make it enough lighter to use modern engines. Nick explains this further in the video. He expects first flight fairly early in 2019.
Thanks to Nick’s effort, you won’t have to spend nearly that much; he has established a price for his kit: $31,890, not including considerable effort to polish the aluminum as you see in the nearby photos. A quick-build option for $3,000 will likely be popular.
The first Ryan ST flew for the first time on June 8th, 1934 and production began the following year, when nine aircraft were delivered. Production rates remained low — about one aircraft every two weeks — but this changed in 1940 when deliveries to military forces began in earnest to support the war effort. Total production of civil and military aircraft before WWII numbered 315. Another 1,253 military versions were produced in ’42-’43 totaling 1,568 aircraft of all models.
The company now known as SeaMax Aircraft reports manufacturing 152 of its amphibious aircraft. SeaMax M-22, a design by Miguel Rosario, has been delivered to more than 20 countries. In the last year the company established a presence in the U.S. market.
Gilberto, 56, is a prominent and well known Brazilian engineer, holder of a PhD in Space Technology and has expertise in systems engineering, management systems, and risk management. He’s been in executive positions in both civil and defense industries in his country, including 18 years at high-level positions at Embraer. He has also work at Mectron (avionics sensors for defense), and held a graduate-level professorship at National Institute of Space Research (INPE).
Seamax won aeronautical awards, such as the prestigious “Outstanding Commercial SLSA” at Sun ‘n Fun in the United States and the Schneider Cup in Italy. It has been featured in more than 40 specialized magazines around the world.
That’s quite admirable for a fresh-out-of-the-gate design entering a marketplace with more than 140 Special Light-Sport Aircraft appearing on 
“Our team has been extremely busy since we’ve been back from Oshkosh,” added Amy. “Traveling to the show in four of our Ranger R7s was an awesome experience and we had an easy arrival into Wittman Airport Saturday morning.” Arriving two days before the show began proved wise when heavy arrival traffic delayed many inbound aircraft as the show was starting.
Even more recently, another Vashon LSA was delivered. “We delivered our second Ranger to a local flight school right at our home airport at Paine Field,” boasted Amy! 