Brian has been a dependable contact at the company for nine years. His talents will readily transfer elsewhere but his departure signals more than his own situation. He continued, "I would like to share a note that Jason Huang, the current but outbound president, wrote to some of our owners recently."
"
Jason elaborated, "On a personal note, I will be stepping down as president of Icon Aircraft. Our incoming president, Lily Hu, brings over 17 years of executive leadership experience and a proven track record of success. She will be supported by our exceptional leadership team, including Jason Courtney, Vice President of Production, and Noah Collins, Vice President of Marketing, Sales, and Service."
Icon has been significantly owned by Chinese investors for several years but operations remained in North America with facilities in California and Mexico.
A move to China may come with benefits such as robotic and other advanced hardware. China has developed immensely in this regard but Icon's timing may bring political challenges.
If China becomes the main manufacturing site for Icon with U.S. operations handling marketing, deliveries, maintenance and other customer services, the company may run into new tariffs proposed by incoming U.S. president Donald Trump. This could significantly increase the cost of an A5 LSA seaplane. Already one of the costliest LSA in the fleet, this wouldn't help. And in mid-2025, here comes a new wave of competition: Mosaic LSA with higher capabilities. New president Lily Hu may be busy in the years ahead.
After proceedings were initiated with the responsible district court in Meiningen, Germany on Tuesday, December 3rd, 2024, the court appointed lawyer Marcello Di Stefano as provisional insolvency administrator.
According to an initial assessment, Di Stefano wrote, "After Flight Design general aviation GmbH filed for insolvency… [we see] good restructuring opportunities for one of the world market leaders in the construction of light aircraft." He added, "The company's order situation is good and the products have a very good reputation on the international market, and the outstanding debts are manageable."
Icon Informs Customers Longtime Icon PR guy Brian Manning wrote recently. He informed me he would leaving Icon at the end of this year, adding, “I’ve experienced all the ups and downs of a startup aircraft company over the years, and I’m very proud of the accomplishments along the way. I’m still yet to meet anybody who’s been up in the A5 who came away disappointed in the experience. It’s an incredible airplane that’s been a passion project for so many talented people over the years.” Brian has been a dependable contact at the company for nine years. His talents will readily transfer elsewhere but his departure signals more than his own situation. He continued, “I would like to share a note that Jason Huang, the current but outbound president, wrote to some of our owners recently.” “Icon Aircraft will be transitioning a portion of its manufacturing to a new, state-of-the-art facility in China,” wrote Jason Huang.
With headquarters in Eisenach, Germany, the company's primary production facility is now located in Sumperk, Czech Republic. For years, the Western European producer has been building aircraft in Kherson, Ukraine. Given daily news coverage, every American knows by now Ukraine has been in defense mode following the Russian invasion almost three years ago. After the situation became completely unworkable — Kherson was an early area to be bombed, then occupied by Russian troops — the company quietly removed tooling, inventory, raw materials, and even some workers to less hazardous facilities in the nearby Czech Republic.
"We have recently moved production of the CT-series — including CTLSi and CT Super (nearby image), which continue to be popular worldwide — to our new partners in Kazakhstan. This allows us to focus more on the F2 at Sumperk,” said Daniel.
If you can't recall where Kazakhstan is, don't fret. Such remote fabrication has been used by Boeing and Airbus for many years. The parent company in Germany is permitted to sublet work to off-site facilities so long as they maintain control of the design and conduct regular oversight of production and quality control. After many years of doing exactly that in Ukraine, Flight Design is well equipped to pursue building its CT-series in Kazakhstan, Central Asia.
In the middle of the last decade, long before Putin's aggression, LSA market leader Flight Design went through a German-imposed reorganization. While difficult, the company emerged stronger and more stable.
In development through this challenging time, Flight Design unveiled their new F-series, starting with their two-seat LSA F2 model at Aero Friedrichshafen 2019. They also displayed an F2e powered by electric motor. Those who examined these displays could readily see the spacious fuselage was built with a four seater in mind for the future. Things were progressing well…
Despite such hardships, Flight Design's German leaders and team closed ranks and moved production to Šumperk, Czech Republic, near the country's northern border with Poland, about 100 miles east of Prague.
“[The company is using] a new, 25,000-square-foot site suitable for use as a production and paint shop,” reported longtime importer, Tom Peghiny in an article from AOPA. The company had been doing some development work in Czech and now expanded their footprint to take up manufacturing. This represented a huge effort under the most trying — and dangerous — of conditions.
The accompanying images show elements of the work to establish a new production facility. Since most molds and other tooling could not be removed from Kherson to Šumperk — about 1,000 miles to the west — the company had to acquire new production jigs and they had to do this while supply lines were pinched, shipping costs were sky-high, and interest rates were rising on funds needed to create a new manufacturing plant.
Yes, those of us in countries where private aviation is well-established take for granted the privilege of flying cross country. In fact, it’s one of the great joys we love to experience. It's a fantastic way to see the country. That’s simply doesn't happen in China. …Or, it didn't. Things are changing and one company has forged ahead despite the challenges.
This story involves a Taiwanese-origin, China-based company called AeroJones and involves the delivery of one of their CTLS aircraft to a customer. In the USA, this would never be news. In China, it most definitely is!
Still the Aeros team continues to build and deliver their flying machines, ranging from hang gliders to trikes to the Sky Ranger three-axis airplanes (
Fox T is another wing for nanolight trikes, created for "those who want to feel the simplicity and real pleasure of bird-like flying," said Aeros. Fox T offers low and slow maneuverable flying. "Fox T has been developed from our beginner Fox glider and has been reinforced and adapted exclusively for flying with nanolight trikes," Aeros clarified.
For experienced pilots wanting maximum performance, Aeros offers their Combat T, "a step higher in nanolight technology, designed for those who want to fly faster and farther."
Besides the Polini or Vittorazi two-stroke engines adapted from the powered paraglider industry, Aeros offers a 
When I visited this company many years ago, they were new in western markets. Fortunately for them, a wealthy Saudi Arab businessman and flying enthusiast helped bankroll the new company.
On my visit, I saw an active operation with workers buzzing to build aircraft. However, they did so in a converted factory that was far from optimal. They made it work but they had ambitions for another facility.
Both airplane producer stories made it into mainstream media.
If we go way back in time, to 2003, that is, before Light-Sport Aircraft, we saw a world where Americans flew kit-built airplanes while European pilots were flying what they called ultralights or microlights. Of course, this is an oversimplification but we had no idea the two methods of production would converge as they have in the last two decades.
Using widely-accepted consensus standards, Light-Sport Aircraft can operate in multiple countries — thanks to the useful work of many volunteers that assembled and maintain ASTM standards embraced by FAA and other CAAs all over the planet.
Let's look at these two stories…
“At this point, there are about 10 to 12 airframes at the Kherson plant,” Peghiny said to AOPA. "Ordinarily, the airframes would be sent to Flight Design’s final assembly and completion center in the city of Šumperk in the Czech Republic."
“We’ve found a new, 25,000-square-foot site [in Šumperk that is] suitable for use as a production and paint shop, and will use that in the future,” Peghiny said in the AOPA article. Engineering work is also conducted in Šumperk.
"Flight Design is offering to move its Ukraine staff and their families to the Šumperk facility," AOPA wrote. "Peghiny said that the Kherson plant will function as long as conditions allow. However, tooling currently remaining in Kherson will have to be replaced by newly manufactured tooling for use in Šumperk. The company will fund new tooling, but it may take six to nine months to build."
"Flight Design employs just under 200 technicians, assemblers, and engineers currently at the Kherson plant," continued Boatman, "and according to Peghiny, the company has been ramping up that number. 'We were hiring more aggressively in the past year because of the popularity of the F2, but the other models in the range have been selling well in Europe — simpler, lighter models in particular,' Tom said." Of course, Tom refers to the CT-series including CTLS that is one of the most popular LSA in America.
“We know [our employees] very well,” Peghiny said in Boatman's article. “Some have been with the company more than 20 years. We’re good friends, and we take this very personally.”
Dave Hirschman wrote, "Dennis Long, a dealer for Aeroprakt… said he spoke with factory officials who said they plan to remain on the job. 'They told me they’re going to keep making airplanes until they can’t'," AOPA reported. 'For the time being, it’s business as usual, although my next two airplanes will likely have to be shipped from Poland because the port of Odessa [in Ukraine] is closed.'”
Aeroprakt has steady registered more aircraft with the FAA. When asked by AOPA's writer, Dennis said, "Right now, due to all the uncertainty, I’m not taking any new deposits. I’m more concerned about the people over there than the airplanes at this moment."
Rather loudly and persistently I beat the drum about "affordable aircraft," but readers also enjoy learning about other aircraft. I will never write about jets or multimillion-dollar turbines but I will continue to follow any "light" aircraft that meets LSA parameters now or after the Mosaic rule.
In this article I will describe how two aircraft are pursuing conventional certification: Flight Design’s F2-CS23 and Icon’s A5.
Contrary to common language, LSA are not "certified." Instead a manufacturer declares they meet ASTM standards and FAA "accepts" that declaration. Frequently at first, FAA audited producers in a point-by-point check of their declaration plus verifying that producers use generally-accepted best practices in their manufacturing. Companies with prior approvals may not be required to undergo an audit; it's always FAA's choice.
I've been involved with ASTM for many years and I can attest to these standards being very rigorous. They were welcomed by many countries where they are in active use. Indeed, FAA is using ASTM standards for LSA as a model for a future approval system for Part 23 general aviation aircraft. Nonetheless, a Standard Certificate is required for some countries; LSA have a Special Certificate. So, some companies believe it is in their best interest to obtain the higher level of approval.
“We couldn’t be happier to see this important step for the F2 program, which ultimately will lead to the F4 four-seat version and the all-electric F2e,” said Matthias Betsch, Head of Flight Design's Design Organization department that created the F-Series and many of its advanced concepts.
"The F2-CS23 is the next step in Flight Design’s ‘Vision Zero’ concept which incorporates all commercially available safety features appropriate for this type of aircraft," the company elaborated. "These features include: a passive stall and spin resistant airframe design; airframe emergency parachute system; Amsafe-brand airbags and inertial reel harnesses; Garmin ESP (electronic stability and envelope protection); a strong occupant-protective enclosure for the pilot and passengers; automatic fuel management; simplified controls such as a combined throttle and brake lever; and a more modern, car-like atmosphere and operation."
“EASA's CS-23 category is an internationally-recognized certification standard which will allow the new F2-CS23 to be easily accepted in all markets worldwide,” said Dieter Koehler, Project Manager the F2 and F4 projects.
Flight Design sees the F2-CS23 as "an excellent choice for flight schools with its wide and easy-to-enter cockpit, fuel efficiency, unique safety features, and state-of-the-art avionics suite. All new Flight Design aircraft come with carbon compensation up to TBO under Flight Design’s Pro-Climate plan." F2-CS23 follows the company's F2-LSA that began deliveries earlier in 2021.
"In countries that do not have a Light-Sport category (Canada and others), the Type Certified version of the 
Primary Category certification also has benefits in the U.S., Icon reported. One is that any A&P is authorized to work on it. Because it is not a SLSA, owners will not need to use designated Icon Service Partners, though the company will still encourage them to do so.
Another benefit is international travel, for example, flying your Icon A5 to islands in the Caribbean, or to keep your A5 on a yacht when you are in another country (image). "Light-Sport Aircraft do not receive a Type Certificate," Icon explained, "so typically, special permission is required before you can fly in another country just like if you are flying an Experimental aircraft." Some exceptions exist, notably in the Bahamas, which does allow U.S.-registered LSAs. The Bahamas is further unique among other countries in that they accept FAA's Sport Pilot certificate.
"International expansion has been a critical part of our business plan since day one,” said Jason Huang, President of Icon Aircraft. “People in the U.S. have been able to enjoy adventure flying in the Icon A5 for several years, and we will continue to produce the SLSA version. But now we are excited to introduce the A5 to others around the world. Type Certification is one of the many investments Icon has made to grow our capabilities and improve the A5. We know it will be appreciated by our international deposit holders and sales partners, and we are all very excited for this day to come."
"Note that we will continue to make the SLSA version, as well," assured Huang. This continues the chance for American pilots to fly A5 without the need for an aviation medical, using only their driver's license in lieu of a medical approval.
Why not pursue approval using the coming regulation often referred to as Mosaic?
"Mosaic is an FAA initiative that doesn’t translate globally," stated the company. "Thus, pursuing Primary Category Certification is the action we needed to coincide with our global expansion plans."
Affordable aircraft are important to many readers. I get that completely and that's why my Day 1 report focused on six aircraft that are very easy to own. Speedy aircraft are of also great interest. In general I like to say (modifying a view expressed by Apple Founder Steve Jobs) that — "It's all about the airplanes." Other high-traffic features of this website include the 
The magic of airshows and their ability to deliver in-person meetings showed their value yesterday at AirVenture Oshkosh. The following relates the story as best I could piece it together. Be advised this is not the final word on the subject. In fact, it is so fresh that changes are probable.
Our friends in EAA's Advocacy department, lead by Sean Elliot and aided by experienced staff held a special Mosaic meeting with FAA. In such a gathering at AirVenture 2021, EAA team members reportedly pushed back on Mosaic regulations, calling it "overly complex." (I was not present at this meeting, so this report is second hand.)
In the meeting, key FAA officials were present and in a remarkable development (which I am surely oversimplifying here), FAA agreed and in the space of a single meeting, listen to what occurred.
Here's the simple response: light aircraft with modern (read: powerful and efficient) engines tend to perform admirably well in high elevations, higher heat, and high humidity. If you fly almost any of these aircraft in high density conditions you already know they perform sprightly.
In contrast, I logged hundreds of Cessna 150 hours from my days as a flight instructor, and — with a similar amount of power as most LSA but also quite a few more pounds — that aircraft definitely does not perform as energetically.
So, a higher power-to-weight ratio is good, but do limits exist?
“I was very impressed with the performance of the CTLS GT with the Rotax 914 Turbo," said Flight Design test pilot Nico Stambula. "CTLS GT Turbo climbs like a rocket and easily reaches 140 knots at altitude." Stambula added that the 914 intercooled engine maintains consistent temperatures. In addition, this is a very smooth flying package."
The first CTLS GT will be shipped to an owner in South Africa, which has both high temperatures and high elevations. Flight Design believes the new model "should be just great for operating in those more challenging conditions."
With the addition of the Rotax 914T option, the long-running CTLS extends its range again. Various models are available as a European 600 kilogram (European) Ultralight, an ASTM-compliant Special LSA, or as an EASA-certified aircraft. Models are available with the Rotax 912, the 912iS and now as a turbocharged performer as the CTLS GT 914T.
Someone was bound to ask why engineers didn't use the newest 141-horsepower Rotax 915 iS, so I queried the company on this question.
Since the start of Light-Sport Aircraft, Flight Design has been represented in America by Tom Peghiny, proprietor of 
Then came the sophisticated CTLS, wholly redone for the American market. It enlarged the cabin and lengthened the fuselage becoming more deluxe throughout.
Now, we come to F2 in what I'm calling the third generation of the iconic shape that still leads the LSA market after almost 17 years. The one and only example presently in America is currently based at 
Nearly every airshow was cancelled for 2020 amidst the global economic carnage driven by lockdowns and travel restrictions to contain Covid.
Well, every show was scrubbed except the Midwest LSA Expo in Mt. Vernon, Illinois. Because that one and only event happened — with no negatives regarding the virus, so far as I know — I got to see and fly Flight Design's latest and greatest, the F2. Not only was the airshow a welcome change from the social barriers everyone had faced over the last few months, but Midwest 2020 provided a venue to see and fly the new model.
"CTSW was a Porsche. CTLS was a Corvette. F2 is a Cadillac," said Tom Gutmann, Jr., the younger half of the father and son 
Tom explained that F2 may look similar to CT but is a nose-to-tail, tip-to-tip refreshed design. It has been some time in development because as Tom noted, "Flight Design engineers had to rework the whole airplane. It is significantly larger than CTLS yet final production models should weigh no more." That's some accomplishment!
It is also built quite differently. All CTLS are essentially "hand made" with hand-layup molds that display the skill of factory workers yet makes each one unique. For F2, Tom said, Flight Design uses molds created on 5-axis CNC shaping tools so each one is fabricated to precise specifications. You may not be able to see the difference in construction but the new method is far better for serial production.
"F2 is manufactured to close tolerances in pre-impregnated carbon fiber for great structural strength and light weight," said Flight Design in Germany. With prepreg carbon fiber from American company Hexcel, F2's honeycomb-core fuselage signifies a big step forward.
Likewise, F2's new wing is a major redesign; the outboard sections feature aerodynamic cuffs (nearby photo).
F2’s tail is all-new as well. CTLS's full-flying stabilator is replaced with a wider stabilizer that has a discrete two-piece elevator with a center section that remains stationary forming what's often called a duck tail. This aids in meeting the ASTM handling requirement. One result is that the airplane does not pitch up during a departure stall.
The altered horizontal tail works cooperatively with the wing cuffs to make a highly stall-resistant airframe, a feature FAA admires so much they gave Icon Aircraft 
Cruise speed at a low altitude (approximately 3,000 feet density altitude) exceeded 115 knots while burning barely over 4 gallons an hour; Rotax's 912iS is known for its fuel miserliness. This allows a topped-off F2 to fly close to 1,000 statute miles. You can fly cross country to a destination and return to base without buying fuel. I once enjoyed this quality while 
Although a mirror reflection of the greater global economy, many pilots are stunned that airshow after airshow has fallen to the virus. It seems like two or three years ago when, back in February 2020, Videoman Dave and I covered the 
Tom has run 
"I'm very impressed with F2. It feels like a bigger airplane, very solid in the air. More stable than I expected. Very easy to land." He's comparing to the CTLS that so many other pilots know.
"F2 feels more stable in the air compared to our CTLS, which offers a sportier feel." Pressing him for details, Tom recounted the following story from a recent flight. It involved F2's autopilot.
"As you know, with the 
In one of the nearby photos taken from the nose of F2, the vertical surface of the tailplane appears enormous, one to rival the very tall tail on an 
When the flight is over, F2 is reportedly easier to land. I asked how?
"A longer wheelbase reduces porpoising and a single beam landing gear absorbs rebound tendency. "We also think that beam gear will end up being more rugged."
Another helpful feature is the single throttle and brake lever (image below): forward is go; back is stop. Simple. Other designs have used this technique, good because the pilot's hand never needs to move during the critical touchdown and rollout phase of flight.
As we discussed the two planes, Tom said he thought I could do the same maneuvers with F2 that I'd done with the Icon A5 and I'd get a similar sensation.
"Departure stalls simply don't," Tom described. "With full flaps, it will 'nod' a bit, a kind of pre-stall but with neutral flaps the stick remains effective at all times."
Tom worked closely with Flight Design during development of F2, playing key roles. He closed saying, "I knew we could achieve those characteristics but I didn't know how well it would fly."
I could almost see his smile over the phone.
I look forward to experience F2, perhaps at the 
The members of the Able Flight “Class of 2020” are as follows (numbered according to photo, not in any order of importance):
Chris Murad (1) of Georgia. Chris recently graduated from Georgia Tech with an aerospace degree. He became paralyzed in 2016 when shot during a robbery as he was leaving work. Chris will train at Purdue University.
Joshua Martin (2) of Texas. Joshua is a graduate of West Point who trained and served as a Special Operations helicopter pilot before losing his lower left leg due to a motor vehicle accident in 2018. With his scholarship, Joshua will return to flying by earning his fixed-wing pilot certificate. Joshua will train at Purdue University.
Michael Price (3) of North Dakota. Michael is a graduate of Penn Foster University in Fargo, ND, and had his first flight as part of an introductory program in 1997. That same day he became paralyzed due to injuries from a car accident. Michael will train at Purdue University.
Steven Curry (9) of Virginia. Steven served in the U.S. Army in both Afghanistan and Iraq. His plans to secure a Warrant Officer training slot to become a helicopter pilot ended when injuries from an IED required the amputation of his left leg below the knee. Steven with train at Aviation Adventures in Virginia.
David Snypes, Jr. (10) of New York. David is a veteran of the U.S. Army having served from 2009 to 2016, including tours in Afghanistan. In 2016, he lost the use of his left arm due to injuries sustained in a motorcycle accident. David will train at Purdue University.
The preceding list is only for this year. 
Of course, I refer to 
Bristell with 
Representative U.S. Sport Planes, led by industry veteran Scott Severen, has demonstrated this baggage capacity with photos showing a 
Since I first saw the F2 in mock up, Flight Design has redesigned the intake for two reasons: "to reduce drag as we confirmed the older version was very functional but draggy; and for aesthetic reasons," said the company. "Flight Design team designer and Head of Airworthiness, Christian Majunke, designed conceptually. He also designed a rather novel installation of the coolant and oil radiators," elaborated Flight Design USA representative, Tom Peghiny.
Also new panel is an SLSA panel with twin G3X screens, a Garmin GTR 225 Com, Garmin GTX 345 ADSB in and out transponder, Garmin GMC 507 autopilot control head (with dual axis autopilot), and Garmin GMA 245 intercom.
Pilot controls remain essentially as they were on the CT-series but note the combined single lever throttle and brake system.
"Our F2 prototype number 002 arrived at port in Miami in preparation for display at Sun n Fun 2020," said Tom. Like most vendors, Flight Design USA hoped to go forward with the Lakeland show but will now unveil the new model at Oshkosh 2020 (assuming it remains on schedule).
"After completing all SLSA required flight testing including the demanding ASTM 3180 anti-spin requirements, production has started on the first aircraft from production tooling in Germany, Ukraine and the Czech Republic," concluded Tom.
At Sun 'n Fun 2020, Deon expected to introduce Whisper to American kit builders. Alas, as with the rest of this group, you probably won't see it until July in Wisconsin.
Bruno will be aided in his approach to the U.S. market by longtimer, Ed Ricks, who once helped the Paradise Aircraft people with their 
Meanwhile, I have been producing more content here on ByDanJohnson.com so everyone sheltering-in-place can at least fantasy fly their favorite flying machine. I will also continue with the "Virtual 
Changes for 2020 include a reshaped and longer cowling, Blackline propeller with new spinner, fully integrated landing light, and an additional NACA inlet to improve cooling. Other aerodynamic improvements include new landing gear legs with internal brake lines and new low drag wheel fairings. This all leads to significantly reduced drag and an increase in maximum speed. The company reports, "[These] aerodynamic modifications have made the CTLS 2020 nearly 10 knots faster!"
A new 
"Our F2 Light-Sport Aircraft model is fully ASTM-compliant after fine tuning," noted the company. "Our first airplanes will be delivered to customers in June 2020. Careful engineering allowed us to bring this complex airplane under the maximum allowed take-off weight (of 1,320 pounds or 600 kilograms)."
For European consumption, Flight Design is pursuing CS-23 approval (similar to FAA's Part 23) for their two seat F2, however, this model will be able to fly at 650 kilograms (1,430 pounds) of maximum takeoff weight when it is granted a CS-23 certificate. "We think this will be ideal for modern flight schools and private pilots," the company stated.
Construction of Flight Design's newest uses a new composite supplier, Hexcel.
Late in 2017, a Flight Design review concluded that prepregs could deliver a more consistent final product by ensuring constant material quality and processing parameters and could produce a lighter and stronger aircraft at a more competitive overall cost. The low-temperature cure could be done outside an autoclave. The latter reduces tooling costs and can boost build rates. Following careful analysis, the company went with Hexcel. Prepreg materials — "pre-impregnated" composite fibers have an epoxy material already present — were first used for the F2 prototype.
Flight Design began to review the market for available material options with a key part of its strategy to find and qualify a prepreg system that is not traditionally used in higher cost autoclave production for aerospace applications.
Already in operation since March 1st, Flight Design will "offset" the carbon emissions from the fuel burned by their airplanes during the first 2,000 hours of operation. They'll do this by employing the 
Offsets will come from cash contributions by Flight Design to programs that meet internationally-accepted standards. Funds will be deployed to planting more trees and other actions that consume CO2.
How does one LSA brand rise and stay above others?
My tongue-in-cheek subtitle comes from the perspective of an average-sized pilot talking to the father and son team of Tom Sr. and Tom Jr. Gutmann. These gentle giants stand so tall above me that even Tom Cruise's acting box would not let me look this pair eye-to-eye.
Indeed, it is a tribute to the spaciousness of CT-series interiors that both these beefy fellows fit inside comfortably. Don't try that in a Cessna 150 (or even a 172)!
Flight Design's CT-series is roomy inside, 49 inches wide, a full 10 inches more than a Cessna 172. It also has super visibility. These facts are true of both CTLS, the current flagship of the German producer, and for the newest CT Super Sport, as seen in most of the nearby photos. The image of the two of us in the cockpit clearly shows that Tom Jr. and I have several inches between our shoulders and we were not smashed up against the door to produce this view.
Tom and I flew Super Sport at the 
What you don't get with CT Super Sport is the back window and hat rack cabin space of CTLS. The slight enlargement of the longer, fancier LS does indeed make the cabin feel roomier and you have less space for things you need in the cockpit — though the floor compartments in front of both seats will suffice for most things you may want to access during flight. Both models keep the ample storage area aft of the cabin but you cannot access that while flying.
For this review, Super Sport was equipped with the 
Coordinating closely with 
Then came a pause in the juggernaut that is 
F2's cabin is 3.1 inches wider — now 51 inches wide, among the broadest in the category — and two inches taller than the CT series’ cabins. Door dimensions have also been increased, making for easier entry and exit. The entry door is set 2.3 inches lower than those in the CT series and pilots who are less flexible will appreciate these changes. Four cabin windows and a sunroof in the rear give the cockpit an open feeling and improve overall visibility, boasts Flight Design.
F2 is available with either a 100-horsepower 
On its first successful first flight, Flight Design said, "Energy consumption for take-off and cruise was within the expected range, and the temperatures in the system were more positive than expected."
Flight Design created F2e with partners 
Our first quarterly report in many years should have come about April 1st. It did not. That date came as 
Digging deeper, the chart shows that longtime market leader 
Strong SP kit suppliers include 
Looking at cumulative registrations, Zenith/Zenair clearly holds the top spot among Sport Pilot kit aircraft sellers. Rans, 
Yet the real surprise comes when you look at our final chart of this article. Kits appear ascendant since 2013, especially when compared to Special LSA that seems to have found a stable registration rate of around 200 aircraft per year. However, when you combine SLSA with Experimental LSA, you can see that all LSA types number closer to 300 units per year, compared to all SP kits at just shy of 400. Specialty registrations like Experimental Exhibition are steady but at a far smaller unit count.
Any ELSA must be shipped from the factory as a bolt-for-bolt copy of the SLSA model, as required under the regulation. No producer can sell an ELSA without first getting approved for a SLSA, so to my mind, combining SLSA and ELSA makes for a fairer comparison to Sport Pilot kit aircraft.
If you love these numbers, please visit 
Jetting straight from Sun 'n Fun, we were able to arrive at 
Zlin Ultra with Rotax 915iS
Belmont Aero DW200
Beringer Everywhere