On December 29th, a new Special Light-Sport Aircraft was approved. With only a couple days remaining in this challenging year, I suspect this will be the final approval of 2008. Welcome to the FA-04 Peregrine, which was inspected after assembly at Hansen Air Group in the Atlanta area. I believe this to be the first LSA from former East Germany (which was ironically named German Democratic Republic even though it was Communist). *** FA-04 Peregrine is a low-wing carbon fiber LSA that evolved from Flaeming Air‘s FA-02, which earlier had won European VLA approval. The interior is 44 inches wide (a Cessna 172 is 39.5 in.) with “lots of legroom” and a large luggage compartment that makes the model appropriate for longer cross country flights. Adjustable seats aid occupant comfort. In an interesting variation, Peregrine has main landing gear that can “easily be converted to a taildragger,” said Jon Hansen.
Archives for December 2008
FAA Keeps Assessing; LAMA Audit of 22 Producers
FAA is more than half way through their assessment of the Light-Sport Aircraft industry. According to post-assessment interviews with companies, FAA teams performing these info-gathering visits have generally been satisfied but some changes will likely be made to assure better written records and procedures. *** In preparation for actions it believes will follow the assessments, industry business organization LAMA accelerated its effort to perform LAMA Compliance Audits on more companies. The industry association has been assembling an expert audit team, processes, and extensive checklists to make the effort easy on producers and very cost-efficient. *** LAMA Founder and Chairman Emeritus Larry Burke reports 22 companies are either done, in process, or in negotiation to become LAMA audited. When these are complete, possibly by next Oshkosh, LAMA says this will cover more than 80% of the Light-Sport Aircraft being sold. *** MARKET UPDATE — Following the 12/12/08 SPLOG, I want to clarify industry performance in 2008, a year most will record as “difficult.” In 11 months of 2008 producers registered 392 SLSA airplanes.
2008 In Review; a Look at the Year for LSA Sales
With one month to go (and it’s hard to imagine a big December), we have figures to report for this most extraordinary year. We’re all (painfully) aware of the economic predicament, but how has this impacted light-sport aviation? Here’s my observations. *** In 11 months, the industry has increased fleet size by 35% to 1,510 fixed wing airplanes from 1,118 on January 1st. Annualizing the numbers, all airplane LSA should register 427 airplanes, which equates to about 35 aircraft per month, which means sales were about 20% off the monthly pace recorded since early 2006. *** Flight Design held its top spot and again delivered the most, but just barely. Remos has been the rising star of 2008 with a 147% increase over their total on January 1st. Tecnam became only the third company to pass 100 units registered. Other solid gains were logged by Czech Aircraft Works (up 69% in the year); Jabiru (up 53%); FPNA (up 55%, though from a lower number, which makes larger percentage gains easier); Aeropro (up 52%).
Relaunch of the Mermaid; Enter Wet Aero Inc.
Some LSA enthusiasts know of a struggle between Czech Aircraft Works and an investor group called Slavia Capital. The latter has been aggressive in their attempts to take over CZAW…unsuccessfully, thanks to the bulldog tenacity of American founder, Chip Erwin. Despite the battle, while CZAW has done well with their SportCruiser in 2008, climbing to the #8 position in overall registrations. Yet something had to give; CZAW’s amphibious Mermaid never entered production. *** Now Mermaid is returning to the market under the name Wet Aero, Inc., though you know proprietor Danny Defelici as the U.S. partner to CZAW. While the SportCruiser builder fends off the aggressor, Defelici said, “I felt it was necessary to get [Mermaid] into production.” Wet Aero has set up its own facility in Kunovice (near CZAW) in the eastern Czech Republic to manufacture the flying boat’s major aluminum sections.