A dozen aircraft were available for a crowd numbering close to 500 people at the first and only east coast version of EAA’s Sport Pilot Tour. After being threatened by poor weather the week before due to Hurricane Ernesto, the Lawrence, Massachusetts stop 30 miles north of Boston enjoyed ideal weather. Weight shift trikes made their strongest appearance yet with three machines from companies that have won SLSA approval: AirBorne and Air Creation. *** One pleasant surprise was a visit from top FAA officials in the LSA office, Larry Clymer and Edsel Ford. Larry (inset photo, front seat) is the manager of FAA Light Sport Aviation Branch…but of keener interest to most Sport Pilot enthusiasts, he has now also logged 70 hours flying trikes. His predecessor, Marty Weaver, was a gyro pilot so Larry continues a theme of agency leaders who enjoy the activity as well as regulate it.

EAA’s Minneapolis Sport Pilot Tour, plagued at first with some logistical challenges, came off very well. More than 500 LSA-interested attendees showed up at Airlake airport south of the Twin Cities metro. The local Sport Pilot school, LSA North at the Aircraft Resource Center, exhibited their CTs along with the Sportstar, KP-5, RANS S-6 and S-7 and others. One of the charmers was the award-winnng Hatz Bantam from builder Mark Marino. The Bantam is an evolution of the original John Hatz biplane designed in the 1960s. Leap forward in time and the lighter Hatz can be flown by a Sport Pilot. Previously only plans were available but Marino is now working on Hatz Partz, components that represents elements of a full kit. The 1,320 pound Bantam is powered by a 120-hp Jabiru 3300 six cylinder four stroke. It can carry a couple two hundred pounders and fly 110 mph.

Perhaps it’s the start of a new trend…early consolidation. Or maybe it’s simply a good fit between two top LSA providers. Either way, customers and sport pilots win in my opinion. Today, a joint announcement was issued by SportairUSA (national importer of the StingSport) and Czech Aircraft Works (builder of the Mermaid, Parrot, and SportCruiser). The two organizations said that SportairUSA will begin distribution of the Parrot high wing and SportCruiser low wing using their nationwide network of dealers. Czech Aircraft Works U.S. partner, Sport Aircraft Works, run by Danny Defelici welcomes the new arrangement saying, “To minimize our time to market, we required an established distributor that knows the sport aircraft market and possesses an extensive dealer network, so the logical choice was to team up with SportairUSA.” SportairUSA chief Bill Canino stated, “We are excited to represent the Parrot and SportCruiser in North America.” He added that bringing a high wing to their portfolio fills out their line and he views the SportCruiser as an exceptional trainer with a modest price tag.

The first Canadian company to win SLSA approval was Summit and their powered parachute, itself the first (and still only) such to declare compliance with ASTM standards. Now comes the High River, Alberta-based Savannah (photo). Skykits Corporation president Eric Giles — whom I met at his display at the Arlington Fly-in — called to say he had gained approval for two Savannahs on August 15th, becoming the 39th SLSA. Savannah was created in Italy as a variation of the CH-701 though to many eyes it enjoys a more pleasing appearance. Savannah is available in three models all using the same fuselage but with different wings. The standard Savannah offers fixed, leading-edge slats while the VG model uses vortex generators to increase STOL capabilities. Savannah ADV has a tapered wing featuring electrically operated slats and electrically operated double-slotted flaps with separate ailerons. For those seeking a utility airplane with very short takeoff and landing, Savannah offers a new choice.

Summer fly-ins are an institution in recreational aviation. I attended one last weekend at Don Zank’s field near Bloomer, Wisconsin (north of Eau Claire). Of 50 or more planes that flew in, one was a handsome Just Aircraft Highlander “Marine” decked out in sleek amphibious floats. This time of year, while plenty of outdoorsmen pursue hunting and fishing, the amphib floatplane is versatile and desirable. Just Aircraft earned its SLSA airworthiness for Highlander — one of only seven American producers out of the 30 supplying Special Light-Sport Aircraft using ASTM consensus standards. Some customers are attracted to Highlander for its bushplane qualities. Others like its high useful load. Just Aircraft reports the 100-hp R-912 model weighs only 600 pounds empty, leaving a useful load of more than 700 pounds. With 18 gallons of fuel, Highlander claims a payload of more than 600 pounds though optional extras will cut into its carrying capacity.

Matt Liknaitzky, the U.S. importer for the French-designed DTA weight-shift aircraft is the newest winner of an Airworthiness Certificate for this world-spanning trike. A DTA Voyageur was used in a spectacular 1999 flight from the tip of South America through the USA across the Atlantic and back down through Europe to South Africa. This immense 26,703-mile cross country trip was accomplished by Mike Blyth and Olivier Aubert and was beautifully documented on a DVD video called “South to South.” The very tough Rotax 912-powered DTA trike is distinguished by its structural mast that makes a forward support tube unnecessary, thereby improving visibility. *** Matt is also the importer of a line of electronic flight instruments under the brand name Stratomaster. I’ve flown with them and loved their clean, clear display. His business, Sport Flying Shop, also carries a wide variety of other flying gear, and is based at the Torrence, California airport.

After Rotax announced ASTM compliance for their lightweight 582 two-stroke engine, many American pilots celebrated. This lighter, simpler powerplant (compared to the 9-series engines) gave ultralight builders seeking SLSA certification more flexibility while significantly lowering cost for buyers. Now HKS enters the arena issuing a Statement of Compliance for the horizontally opposed, twin-cylinder, four-stroke, 60-hp 700E engine. HKS is lighter than four-cylinder engines and can save buyers several thousand dollars. American importer HPower has assisted at least 29 companies as they became HKS-powered, including such leading names as RANS, Quicksilver, Murphy, Earthstar, CGS, Titan, ASAP, and Flightstar. The Japanese company, HKS Aviation Co., Ltd., made their declaration on July 16, one month after the Rotax 582. Behind HKS Aviation is real depth in a 400-employee company active in high-performance auto components. I’ve flown a number of airplanes with this engine and have become converted to its smooth power.

CubCrafters, builder of the Part 23 Top Cub, won their SLSA airworthiness today, becoming SLSA #37 to make their Statement of Compliance under ASTM consensus standards. The Washington state company brings the third J-3 Cub-like product to the market following Texas-based Legend Cub and the Zlin Savage from Italy. CubCrafters’ version follows their conventionally certified Top Cub and the company prides itself on building the Sport Cub CC11-100 on the same assembly line, which some buyers will value. AirFleet Capital, EAA’s official aircraft financing partner, is willing to finance a Sport Cub over a 20-year period (longer than other brands) because it is built on a Part 23 production line. Sport Cub is powered by the 100-hp O-200 Continental engine (as is the Legend Cub, though that company is also working with the Jabiru 3300) which allows the CubCrafters’ model to cruise at 105 mph (91 knots).

One of the most beautiful areas in the 48 states is Washington state, especially in summer. So, no wonder the third largest fly-in of the USA takes place north of Seattle in July. Some 50-60,000 visitors attend. With Boeing nearby, tons of seaplane activity, plus being relatively close to aviation-crazy Alaska, Arlington is the major western event. This year it will be even better as Arlington has its own LSA Mall, modeled after the same concept at EAA AirVenture Oshkosh. *** Thankfully, I’m recovering well from my injuries in early April and will attend. If you can come to Arlington, look me up in the Mall on the 5-6-7th of July. Later in July, I’ll do duty in Oshkosh’s LSA Mall from July 23-30. I hope to see you at one of these or at a Sport Pilot Tour stop — Minneapolis (Aug.