As Sun ‘n Fun 2022 comes to a close, so does my daily reporting. This happens through long days and short nights. My sleep schedule can soon get back to normal. In an article already underway, I will make some forecasts for what we’ll see at AirVenture Oshkosh 2022 based on what was displayed at Sun ‘n Fun 2022. Watch for that in a couple days after I catch my breath. Meanwhile I’m expecting to go fly in the TL Sport Aircraft high wing TL-3000 Sirius and perhaps their retractable tandem Stream. I’m also scheduled to go fly the BOT SC07 Super Cruiser. I hope to have reports on these later in April. Meanwhile, here’s a final daily report from Sun ‘n Fun 2022… Savannah by ICP What is it about orange? Several people told Savannah rep’ Walter della Nebia that it attracted them. I felt similarly. I can’t explain it but the show airplane certainly looked great and drew plenty of visitors.
Manufacturers ICP / Skykits
Building Your Own Airplane… Seem Hard? How About with Experienced, Professional Help?
Build Your Dream
Aided mightily by the real boss, Greg’s longtime spouse Crystal, the pair have created a idyllic setting to build your own aircraft. Located about 30 miles northwest from Tucson or a hour and a half south of Phoenix, Arizona, Greg and Crystal built with their own hands a large hangar with all the space and all the amenities needed to get your airplane kit put together. Yours and several other projects all at once. While you work at the project in time periods that work for you, the experience will be a eat-sleep-breath kit building from Day One. As Greg notes, entertainment and restaurants are a few miles away at the closest and people come to the Build Center not to go out for dinner or a movie but to build airplanes. So, build airplanes they do. They'll work with you 12 hours a day if you want, but "it's whatever the customer wants to do," clarified Greg. If eight hours maxes you out (probably understandable at first, anyway), you can collapse on one of the lounge's comfy chairs and recharge your batteries. I was told by several builders that Crystal puts out a good food spread and generally these two make you feel at home, even providing bedrooms so you can stay on the job as long as your schedule allows. "Most spend time, return home, and come back to finish the task," explained Greg. Building a Lightning — Greg observed, "All the primary fiberglass assemblies are preformed and fully fabricated including fuselage halves already bonded together with bulkheads installed; wings are substantially finished with fuel tanks installed; and all flight controls are installed." The kit also includes cowls, the prop spinner, cockpit canopy frame, seats, and baggage floors. Welded structures, such as the motor mount, spar box assembly, gear leg sockets, and various brackets, are finished and epoxy painted at the factory making them ready to install. Lightning's landing gear is machined from 7075T6 aluminum and ready to fit. An airplane like Lightning "goes together pretty fast," said Greg, continuing to say that the process takes only about three weeks. If you try this at home, plan on more time, other builders told me. The help the Build Center gives is invaluable plus it's more social than many projects. The Experimental Aircraft Build Center Arizona also helps builders create the Flying Legends Tucano and the ICP Savannah. The Build Center is 10 miles west of Marana's municipal airport, which itself is 20 miles northwest of Tucson, Arizona or about 100 miles south of Phoenix. This is baking hot country but Greg and Crystal's facility will keep you comfortable. Find out more by visiting Experimental Aircraft Build Center Arizona. As you will see and learn, you need bring nothing but your enthusiasm. Greg and Crystal — along with partner Jack Norris — will provide everything. You get a sleeping room. Crystal prepares meals and several builders told me this may be the highlight of the whole experience. The Build Center provides all the tools, jigs, and work tables you need. Let's get to work!https://youtu.be/AWZe8-hKSCo https://youtu.be/fuYArZbdTzw
Let me be honest. I’ve built one aircraft in my life. It was a Quicksilver MX series, a design that can be assembled by first timer with reasonable skills in only 80 hours or so. A lot depends on your skills and interest, your basic mechanical aptitude, the space you have to work, your tools, and how much time you can put into a project. Quicksilver is a super-simple kit. What if you desire something more complex? I deeply admire those who have built some of the most beautiful aircraft I’ve ever seen. As many a manufacturer has told me, even kit manufacturers — “A homebuilder can do an even better job than we can at the factory because they can spend all the time needed to get every detail exactly right. We have a business to run and even though we’re very good at what we do, we cannot justify the hours a homebuilder may invest.” Sounds right to me… even considering how many superlative factory-built kits I’ve seen.
Sun ‘n Fun Day 2 — As Summertime Approaches, Light-Sport Seaplanes Draw Interest
* My definition of these terms is that a "seaplane" has a boat hull where a "floatplane" is straight or amphibious floats added to a landline. The terms are not used as official designations. Home page sunset view over Seamax LSA seaplane by Randee Laskewitz
Seaplane flying is a specialty within aviation but it is one that has steady appeal and develops passionate aviators. I prefer to modify that “gear-up landing” line to… “There are pilots who love seaplane flying and there are those will love it.” Be forewarned: Once you touch your seaplane* or floatplane* to the water, it may forever change you. If you think I’m being too dramatic, you probably haven’t flown off the water. Great, so it’s magical to see the countryside from a few hundred feet up. Even better, enjoy flying low across the clear, blue, warm waters of the Bahamas. Examine the shoreline of a big lake in a way you’d never do in a landplane. Compared to airports, seaplane pilots have many times more lakes or rivers able to handle a landing. All are fair game in an emergency and many U.S. waterways will permit normal water operations. Are you convinced yet?
ICP — Savannah taildragger (Aero 2013)
ICP gained brand name awareness primarily with their Savannah model, a short take off and landing airplane that sells for a modest price. We've seen it several times but always in tricycle gear. Now at Aero, everyone saw for the first time the new taildragger model from Italy's ICP. We spoke with company leader Loredana Arisio. We also take a look at their new light aircraft engine with questions answered by engine Andrea Caglio.
ICP gained brand name awareness primarily with their Savannah model, a short take off and landing airplane that sells for a modest price. We’ve seen it several times but always in tricycle gear. Now at Aero, everyone saw for the first time the new taildragger model from Italy’s ICP. We spoke with company leader Loredana Arisio. We also take a look at their new light aircraft engine with questions answered by engine Andrea Caglio.
Skykits — Rampage
Skykits - formerly of Canada, now of Paris... Tennessee, that is - has offered a series of Italian STOL designs, which they assembled north of the border. These days a U.S.-based company, Skykits branched off with their own design, this gleaming Rampage. Not only does Rampage look terrific in navy blue over highly-polished aluminum, it offers short-field flying capabilities and more. Come inside and have a look with us.
Skykits – formerly of Canada, now of Paris… Tennessee, that is – has offered a series of Italian STOL designs, which they assembled north of the border. These days a U.S.-based company, Skykits branched off with their own design, this gleaming Rampage. Not only does Rampage look terrific in navy blue over highly-polished aluminum, it offers short-field flying capabilities and more. Come inside and have a look with us.
Skykits — Savannah
The Italian design from ICP is the Savannah, one of the best performing STOL (Short Take Off and Landing) Light-Sport Aircraft. Skykits is a formerly Canadian company recently moved to Tennessee and they build major components from ICP into no less than four finished versions called the regular Savannah, VG, ADV, and Skykits special variation, the Rampage.
The Italian design from ICP is the Savannah, one of the best performing STOL (Short Take Off and Landing) Light-Sport Aircraft. Skykits is a formerly Canadian company recently moved to Tennessee and they build major components from ICP into no less than four finished versions called the regular Savannah, VG, ADV, and Skykits special variation, the Rampage.
Aero Friedrichshafen Video Bonanza
We were busy at Aero Friedrichshafen 2013, knocking out more than 30 videos for your viewing information and entertainment. That’s more than seven videos per day and a sum of more than five hours total running time (more than three Hollywood movies in minutes of viewing time). With these and all the videos shot at Sun ‘n Fun the week before Aero started, we expect to offer more than 300 videos on our LSA Video page. I’d like for you to understand how much effort that represents. I’d also like to thank BRS Parachutes, ICP North America, and Renegade Light Sport Aircraft for providing financial assistance to Lightsport and Ultralight Flyer. Without their support, these videos would not likely have been made. Today, I uploaded more than a dozen new videos to ByDanJohnson.com. We have many more coming. The newest ones include • Introduction to Aero and what you’ll see • Tecnam’s aerobatic Snap • FlyEco’s Diesel engine • FK 51 replica Mustang • Yuneec’s electric-powered eSpyder • lightweight electric aircraft • Zlin’s customizable Bobber • ICP’s Savannah taildragger and new engine • BOT SpeedCruiser with D-Motor • BRM Aero’s Bristell taildragger • Phoenix Air’s electric-powered ePhoenix • Nando Groppo tri-gear and, • one from AirVenture 2012 on the Zenith CH-650.
Global LSA in Paris… Tennessee, That Is
In the endless tree-covered rolling terrain of northwestern Tennessee resides a Canadian manufacturer of Italian aircraft. Welcome to Skykits, producer of two models of Savannah, a STOL (Short Take Off and Landing) design from ICP of Italy plus a newer variation of ICP’s Vimana, which Skykits calls Rampage. *** Starting out in his native Canada, Eric Giles found a willing Tennessee community offering incentives if he set up shop at the local airport. Housed in a new facility (photos), Skykits ranks in the top 20 producers that generate about 90% of all SLSA registered to date. *** After ASTM-certifying four models Skykits offers three today: Savannah VG with vortex generators replacing earlier fixed leading edge slots; Savannah VGW, the VG’s larger brother done in wide body form (“47 inches plus bubble doors”); and Rampage with electrically-deployable leading edge slats mated to Fowler flaps.
On the Rampage…Yet Another SLSA from Skykits
Rampage looks so dissimilar to its predecessors from Skykits that it took a second glance to make the connection. While it shares the STOL wing devices with versions of the Savannah, Rampage has a sleeker look that might broaden the appeal of these short takeoff and land designs from ICP of Italy. *** For those who got to see the new model at Sebring the airplane’s lines weren’t alone to admire. Deep blue paint was used in strategic accent to highly polished aluminum on most of the fuselage; Rampage gleamed brilliantly in Florida’s warm sun. The finish was brought inside where a polished aluminum instrument panel frame contrasted with royal blue inset subpanels (photo). Skykits director Eric Giles reported that the bright metal inside had not caused reflective problems on their long flight from western Canada. *** Rampage, the fourth SLSA model for which Skykits has gained airworthiness, uses electrically deployed leading edge slats to continue the impressive performance of the Savannah models.
A Trio of Savannah SLSA
OK, this may sound complicated. Savannah is an Italian design which bears some resemblance to the CH-701 (though with numerous differences). It is being assembled by Skykits, a Canadian company with a U.S. location from parts fabricated throughout Europe. Got that? OK, let’s add more. Savannah is one fuselage with three diffferent wing variations. While I grant you these perform somewhat differently, I didn’t see them as each deserving their own airworthiness. But I’m not FAA…who, it turns out, did want three certificates to prevent owners from wing swapping. So, today, we have SLSA #39 as the “regular” Savannah with the fixed leading edge slat (inset photo); and #47 ADV model with a tapered wing with movable slots (rather significant differences); and the new #48 VG model, which has no slats, insteading using a line of vortex generators. Still with me? OK, finally, you can get all three models in ready-to-fly form, as an ELSA, or as a 51% kit.
How Shall We Count New SLSA?
Barely over a month ago, I reported that Skykits Corp won their first approval for the Savannah. In that SPLOG posting I said that the plane would be produced with three wings mated to the same fuselage. Now, proving the point, Skykits president Eric Giles announced his second SLSA approval…for a Savannah ADV. Eric also claimed the airplane delivered to Hawaii was the first SLSA to be registered in the state (photo). *** Savannah ADV has a tapered airfoil with full-span retractable leading edge slats and double-slotted flaps, both operated electrically with a mechanical backup. Skykits says, “The new wing increases cruise speed by 25 mph while maintaining the STOL capabilities. “As their company name implies, kits are also available. The questions arise, though: Is this a new model or a model variation? Do we count it as a new SLSA? We’re bound to have more such questions as the LSA evolution continues.